#Gamecube controller adapter switch dock mod

Unscrew the casing of GameCube controller adapter and remove the board and plugs.Screw the main board into place on the 3D printed part and glue to the GameCube carcass.Align the Switch Mainboard and cut holes into the GameCube rear plate to accommodate the ports needed in the back.Remove the spring-loaded USB-c port from the bottom of the Switch dockДЄlign the spring-loaded dock to the 3D printed part and glue them using CA glue.Carefully remove the Switch dock circuit board and small LED board making sure you don't damage the flat ribbon connected to the spring loaded USB-c dock.You will need a triangle screwdriver as well as a Philips head screwdriver. Unscrew all the Switch Dock parts, making sure to keep the screws.Sand away the rough edges, making sure the fit for the 3D printed parts is snug. Cut the old GameCube carcass to the size of the 3D printed parts.Download the STL files for 3D printing.Amazon: Gamecube Controller Adapter ($15).If you are at all unsure about this I recommend picking up a replacement dock to use instead of your original.

#Gamecube controller adapter switch dock mod

WARNING: This mod involves completely breaking down your Nintendo Switch dock and gluing the pieces into something else. This Switch dock Mod by Rated-e Mods uses an old GameCube carcass, a GameCube Controller USB adapter, and some 3D printed parts to transform your Switch Dock into an awesome looking GameCube hybrid. Sometimes when you fall down a YouTube hole you find something so cool that you just have to share it.